Sleepers and Posts

Both subtle and sleek, Explorer Sleepers are crafted to blend into any project whether it commercial or residential - a gentle inclusion that would feel at ease among any architectural style.

Sleepers

Charcoal Slate Explorer Concrete Sleeper

Available Sizes

Charcoal Timberlook Explorer Concrete Sleeper

Available Sizes

Graphite Sandstone Explorer Concrete Sleeper

Available Sizes

Gumtree Timberlook Explorer Concrete Sleeper

Available Sizes

Ironbark Timberlook Explorer Concrete Sleeper

Available Sizes

Natural Sandstone Explorer Concrete Sleeper

Available Sizes

Grey Smooth Explorer Concrete Sleeper

Available Sizes

Downloads

Sleepers

Retaining Wall Posts

RETAINING WALL POST 100MM SERIES TO SUIT 75MM SLEEPERS

Our posts are Hot-Dip galvanised to comply with AS/NZS 4680:2006

Download our brochure for information about heavy duty retaining wall fence brackets

Downloads

Retaining Wall Posts

Building Approval & Certification

The Australian Standard AS 4678-2002 Earth Retaining Structures is a national standard, however its important to note local and state government requirements vary around Australia. It is recommended that you check with local authorities prior to commencement. Special designs may also be required depending on wall height, post spacing, slope steepness or soil conditions. Retaining walls may also be required to be battered back from the vertical (leans back into the bank).

Materials

All steel posts are hot-dip galvanised complying with AS/ NZ 4680:2006. Minimum concrete grade in post hole to be 25MPa. For simplicity, this guide is based on installing a 1m high wall with 200 x 75 x 1800mm timber sleepers. Adequate drainage is critical to avoid water retention. Drainage ag-pipe, non woven geotextile fabric, waterproof plastic membrane and gravel shall be installed to the rear of the retaining wall. Draining shall be installed in accordance with AS/NZS 3500 Plumbing & Drainage and other relevant codes and guidelines